This video demonstrates the sample code of ADC by Nuvoton M031/M032 evaluation board. The sample code shows how to use Bandgap voltage to calculate the supply voltage. It includes the sample code description, source code tracing, and the steps to compile and download. You can also see how the sample code works in the end of this video. Users could easily know how to use ADC sample code and Nuvoton evaluation board by following the steps. #ADC #Bandgap #NuMicro #Nuvoton #MCU #SampleCode #PowerSupplyMonitoring #Basic #General #Training #Learning #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

This video demonstrates the sample code of WDT by Nuvoton M031/M032 evaluation board. It includes the sample code description, source code tracing, and the steps to compile and download. You can also see how the sample code works in the end of this video. Users could easily know how to use WDT sample code and Nuvoton evaluation board by following the steps. #WDT #M0 #NuMaker-M032SE #Keil #Basic #General #Training #Learning #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

NuMicro M031/M032 Series SPI Sample Code : Demonstrate how to access SPI Flash via SPI interface. 【Datasheet of SPI Flash W25Q35】 https://www.winbond.com/resource-files/W25Q32JV%20RevI%2005042021%20Plus.pdf #SPI #Training #Level1 #Workshop #SampleCode #SerialPeripheralIngerface #SPIFlash #W25Q35 #ReadID #Read #Program #Basic #General #Training #Learning #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

We implements 6 demonstrations according to the features of MA35D1: 1. Video Playback : HD video output 2. ML People Counting : Face Detection and Number Counting 3. 2D Accelerator : 2D Hardware acceleration example 4. Data Security : Improve data security with OP-TEE 5. KWS by RTP M4 : uses MA35 built-in M4 to perform keyword detection 6. VoIP : network phone example based on SIP The video will introduce the resources and operation details used in each example. #HMI #IndustrialControl #Application #Linux #MPU #MA35D1 #Training #Learning #en #NuMaker-HMI-MA35D1-S1 - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

This video will introduce NuMaker-HMI-MA35D1-S1 Quick Start to you. 1. Unboxing 2. Power On and Demonstration 3. NuMaker-HMI-MA35D1-S1 Introduction 4. Development Platform 5. Development Environment Setup #HMI #SoM #System-on-Module #Yocto #DevelopmentBoard #Product #general #en #learning - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

Data logger demo with M0A23 and N9H30，emulate CAN protocol transmission and display data on screen. #Automotive #HMI #CAN #DataLogger #M0A23 #N9H30 #Embedded World 2022 #Learning #en #basic - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

Motorcycle Dashboard Demo on NuMaker-HMI-N9H30 EVB 【Demo Features】 • Fast booting (booting time less than 1 sec) • The dashboard GUI implementation by emWin graphics library • The 2D GFx help the smooth TFT-LCD display #en #Application #Learning #Basic - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

Briefly explain the basic functions and security features of Nuvoton's M235x IoT Security MCU series products, and actually demonstrate the online streaming music playback function provided by the Google Cast Wireless Speaker based on the M235x Series and the Youtube APP on the mobile phone. #en #Learning #Intermediate #application #M2351 #M2354 #GoogleCast #WirelessSpeaker #Play-Fi #EmbeddedWorld2022 - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

The video introduces Nuvoton's MPU N9H30's development set-up for Linux and Non-OS, taking NuMaker-emWin-RDK-N9H30 for example. Starting from the EVB introduction to BSP and related software downloads. - User manuals and related resource can be downloaded https://www.nuvoton.com/products/gui-solution/gui-reference-design/numaker-emwin-rdk-n9h30/ First, we introduce how to program Linux OS to the N9H30 evaluation board Find the N9H30 evaluation board resource that we used on Nuvoton’s Github and download the VMware Image https://github.com/OpenNuvoton/MPU-Family VMware application can be downloaded from the VMware website https://www.vmware.com/tw/products/workstation-player/workstation-player-evaluation.html First, open the VMware Find the ubuntu_NUC970_980_Linux folder we downloaded Choose Ubuntu 64-bit_nuvoton.vmx Choose Play virtual machine The password is “user” It will take a while to open this application for the first time Open the terminal when the system is ready Enter NUC970_Buildroot-master folder After entering the folder, we need to update the Buildroot tool Enter the command as shown below “git reset –hard” “git pull” After updating, enter the dl folder Remove the original Linux kernel and u-boot Enter the command as shown below “sudo rm -rf linux-master.tar.gz uboot-master.tar.gz” After entering, enter the password “user” Leave the dl folder and enter the Buildroot folder Enter the “make clean” command You don’t need to do these steps unless updating Buildroot tools Now, we set up the evaluation board configuration Enter configs folder to search evaluation board name Back to buildroot after searching Enter “make nuvoton_n9h30_emwin_defconfig” to generate configuration file After finishing these step, enter “make” to compile It will take about three hours to compile After compiling, copy the two files below to windows “/NUC970_Buildroot-master/output/images/uImage” “/NUC970_Buildroot-master/output/build/uboot-master/u-boot.bin” Create text file ”env-nor.txt” The content is shown below: baudrate=115200 bootdelay=1 stderr=serial stdin=serial stdout=serial setspi=sf probe 0 50000000 loadkernel=sf read 0x7fc0 0x200000 0x600000 bootcmd=run setspi;run loadkernel;bootm 0x7fc0 bootargs=noinitrd root=/dev/mtdblock2 rw rootfstype=jffs2 console=ttyS0 rdinit=/sbin/init mem=32M mtdparts=m25p80:0x200000@0x0(u-boot),0x600000@0x200000(kernel),-(user) ignore_loglevel Then, we need to install NuWriter and related file The NuWriter is a programming tool provided by Nuvoton. The NuWriter application and firmware code are open-sourced, and users can add new features or develop new user interfaces per user’s application NuWriter: https://github.com/OpenNuvoton/MPU-Family Open “NUC970_NuWriter-master” Enter Driver folder and install “WinUSB4NuVCOM.exe” Enter /Nuwriter/Release and execute NuWriter Choose IC number based on the evaluation board We need to program Image to SPI Flash, so we choose SPI Here we need to turn the all Power-On Setting to ON Push Reset button Return to NuWriter to check the green light and the connection If it is not connecting, click Re-Connect to reconnect After confirm the connection, start to program Image Program the three files to particular address u-boot.bin program to 0xe00000 env.nor.txt program to 0x80000 uImage program to 0x200000 After programming, turn the Power-On Setting to off Push the Reset button Evaluation board can start to boot from SPI-NOR After booting, we need to find the rcS demo application under/etc/init.d Enter “chmod 777 rcS” to modify the application Now, you can see the application on the evaluation board panel Here, we finish compiling and programming The next topic is how to compile and program Non-OS code First, download MDK-Arm from the link below https://www.keil.com/download/product/ Download the Non-OS BSP provided by Nuvoton https://github.com/OpenNuvoton/MPU-Family The BSP includes Keil environment set up user manual Use Keil need to purchase the related license After downloading, Open Keil uVision Click the File on the upper left and choose Open Go to the BSP that we downloaded choose BSP, SampleCode, emWin_SimpleDemo, KEIL and emWin_SimpleDemo.uvproj Click Option for Target Click Device and choose NuMicro ARM9 Database and N9H_series After setting up, click Rebuild, and it will generate a sample code application which is a binary file Open the NuWriter and connect it to the evaluation board Choose SPI and search the application we built \N9H30_emWin_Non-OS_BSP_v1.04.000\N9H30_emWin_Non-OS_BSP_v1.04.000\BSP\SampleCode\emWin_SimpleDemo\KEIL\obj\emWin_SimpleDemo_FW070TFT_24BPP.bin Follow the setting and program the file to 0x0 After programming, turn the Power-On Setting to boot from SPI You can see the demo application on the evaluation #Basic #Product #Tool #Learning #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/ contact us: SalesSupport@nuvoton.com

This video demonstrates a AMI 2.0 compliant Smart Meter design with Android APP of real time data reading #en #Learning #Intermediate #Application - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/tw/ contact us: SalesSupport@nuvoton.com

1. Show how to use the ICP Programming Tool to store the firmware to the SPI Flash device inside Nu-Link2-Pro, then after connecting the target chip, press the trigger button to complete offline programming. 2. Demonstrate how to use the ICP Programming Tool to store the firmware to the SPI Flash device inside Nu-Link2-Pro, and then connect the target chip. The external signal completes offline programming through the Control Bus interface. This interface connecting to the automatic programming machine is very convenience. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://bit.ly/3bk0AD8 Contact us: SalesSupport@nuvoton.com #en #Tool #Training #Intermediate #Learning

Demonstrate how to use the ICP Programming Tool to generate a programming file, and use the PC to save the firmware to the USB/SD storage device, insert the USB/SD storage device into Nu-Link2-Pro, and then connect the target chip, press the trigger button to complete offline programming. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC Buy now: https://bit.ly/3bk0AD8 Contact us: SalesSupport@nuvoton.com #en #Tool #Training #Intermediate #Learning