Automotive Data Logger consists of NuMicro® NUC131 microcontroller and N9H30 microprocessor. NUC131 supports CAN Bus to log On-Board Diagnostics-II (OBD-II) data, which includes vehicle velocity, engine RPM, engine coolant temperature, temperature in car from engine control unit (ECU) emulator. Then NUC131 converts the OBD-II raw data and transmits the above information to N9H30 by UART. N9H30 shows the received information on 7” TFT-LCD human machine interface enhanced by emWin. #Application #Learning #Basic #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/tw/ contact us: SalesSupport@nuvoton.com

In this webinar, we discussed the Nuvoton NuMaker IoT Platforms that are supporting Arm Mbed OS and Pelion Device Management services. We also showcased how you can use these reference designs to build and manage your smart IoT devices and applications. Host: Austin Blackstone, Lead Developer Evangelist - Arm Pelion / Mbed OS Speaker: Morgan Du, Principal Engineer - Nuvoton IoT Development Slides: https://drive.google.com/file/d/1xSSzc0RBZXPjgrEwlC53MFNNMK7vVBOB/view?usp=sharing Learn more about the Nuvoton IoT platform: https://bit.ly/3gRRvSX Learn more about the Nuvoton NuMaker-IoT-M487 platform: https://bit.ly/2QSafqW Shop the NuMaker-IoT-M487 development board: https://direct.nuvoton.com/en/numaker-iot-m487 #Product #Application #Webinar #General #en

The ML51 is a Flash embedded 1T 8051-based microcontroller. The instruction set of the ML51 is fully compatible with the standard 80C51 with performance enhanced and low power consumption. The ML51 runs up to 24 MHz at a wide voltage range from 1.8V to 5.5V, and contains up to 64/32/16/8 Kbytes Flash called APROM for programming code. The ML51 Flash supports In-Application-Programming (IAP) function, which enables on-chip firmware updates. The ML51 includes an additional configurable up to 4/3/2/1 Kbytes Flash area called LDROM, in which the Boot Code normally resides for carrying out the In-System-Programming (ISP). - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/tw/ml51-series/ contact us: SalesSupport@nuvoton.com #Product #Learning #Basic #en 0:00 簡介 0:20 Agenda 0:45 NuMicro Product Portfolio 1:28 2019 Brand New MCU Platform 2:06 ML51/ML54/ML56 Series Portfolio 3:29 ML51 Series Low 4:50 NuMicro Naming Rule 6:06 NuMicro® ML51 Features 8:19 4 Different Power Modes 10:44 Low Power Mode Features • Wake up resource: WKT, ACMP, GPIO 12:37 Low Power VS Battery Life 13:28 ADC 15:00 Comparison of 8-bit Products Feature 17:13 Fire Fighting System 21:30 Battery Management System (BMS) 22:30 Gaming Phone 23:36 Development Board 24:13 Development Environment

Nuvoton has provided all kinds of size panels from 3.5 to 7 inches that support i80 mode and RGB interface to show GUI. N9H series supports hardware 2D Graphics Accelerator and MJPEG codec to process images. To meet customers HMI needs, Nuvoton has already prepared low-end to high-end products including M0, M4, and Arm9 series. #Product #Learning #Basic #en - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: https://direct.nuvoton.com/tw/numaker-emwin-n9h30 contact us: SalesSupport@nuvoton.com 0:00 簡介 1:32 Nuvoton HMI Solutions 3:04 Nuvoton HMI Development Systems 4:40 emWin Supported HMI Solution 5:29 Nuvoton Homemade Free GUI Templates 5:55 HMI Successful Story 7:15 Nuvoton MCU Feature for GUI 7:58 NuMicro N9H Series 9:26 NuMicro M480 Series 10:26 What is HMI and emWin Library 11:01 Windows Tools 12:34 Use GUIBuilder to easily create GUI 13:32 em Win sample code path in Nuvoton BSP 13:54 How to build the project • Both of the BSP and hardware are right, the display should 14:10 Nuvoton Forum 14:57 Supported LCD driver IC List (the popular ones)

Secure Smart Metering Communication Reference Design Hi everybody, today we are going to introduce a reference design of Smart-Metering communication card based on NuMicro M2351 Series microcontroller. You can find useful security features based on the Arm Cortex-M23 CPU core with Nuvoton’s in-house technology integration. The auto-metering is an infrastructure for automatic, remotely, wire or wireless meter data reading. It’s highly possible to be intervened if there is no security mechanism. That is a very typical IoT security issue in the IoT era. In many countries, there are a lot of Auto-Metering Infrastructure (AMI) projects being undertaken by main electricity power companies worldwide. Most projects start from upgrading the communication modem cards as the first step rather than retiring the meters. The modem card can play as a gateway to monitor the incorrect device operation and data transmission security. Issues of modem card security are covering: First, a limited performance due to crypto computation efficiency Second, speed limitation due to interface choice The third, cost burden due to extra hardware modules for different communication protocols Nuvoton’s reference design of Secure Smart Meter Communication is an end-to-end security solution for AMI. With the collaboration with SPI-Korea, the solution incorporates a lot of advantages such as TrustZone security for firmware, a range of interfaces for device communication, secure over-the-air firmware update, and remote management. With the complete hardware specification of M2351, a security software company, SPI-Korea, can easily implement their secure AMI solution for modem card which connects meters and cloud servers. M2351 also contributes the crypto acceleration during the cryptographic computing in order to save CPU time for different communication protocol modules by its powerful hardware functionalities during message transmission outside of a microcontroller unit. SPI-Korea has developed a range of Armv8-M TrustZone based technologies. Her expertise covers Boot Manager, Key Manager, and Device Manager, which is very useful for microcontroller security and certainly shows the stability of a microcontroller device. Also, they are certified by Korea Electricity Company. We hope this successful experience can be further adopted in other areas worldwide because it’s a secure, accurate and environmentally safe solution for AMI. This slide is a picture for SPI-Korea AMI modem card design. NuMicro Family microcontrollers can be utilized for designs of auto-metering infrastructure devices. We start from AMI modem card and we are confident to support meters of any next-generation of AMI. We now integrate M23-based microcontroller with M4-based or Arm9-based microcontroller as a proposal for next-generation modem card of Korea AMI and we hope to provide high-performing cost-effective solution for all AMI devices in the future. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC contact us: SalesSupport@nuvoton.com

．Why FIDO Authentication ．Security Device for Personal Identity ．USB Dongles Usage ．M2351 USB FIDO Key SDK ．Support Capacitive Fingerprint Sensors ．M2351 USB FIDO Key with TrustZone ．Values Brought by M2351 ．Collaborative Software Development ．An Open Platform with Content Protection ．Leading Market Position for Software Protection For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC #Product #Learning #Basic #en 0:00 簡介 0:28 Why FIDO Authentication 1:19 Security Device for Personal Identity 2:01 USB Dongles Usage 2:29 M2351 USB FIDO Key SDK 3:36 M2351 USB FIDO Key with TrustZone 4:07 Values Brought by M2351 4:55 Collaborative Software Development (2) 6:10 An Open Platform with Content Protection

This video is going to show you our latest Low power ML51 series microcontroller. The ML51 platform features high performance and pin-to-pin compatibility with our 32-bit microcontrollers, such as M480, M031, and M261 series . ML51 series supports up to 24MHz operation frequency, and 1.8V to 5.5V operating voltage, it provides four power modes: normal run mode, low power run mode, low power idle mode, and power down mode. In power down mode with multiple wake-up sources. The power consumption in low power idle mode is down to 13 μA and in power down mode it is less than 0.8 μA. When the clock runs at internal RC oscillator can also allow 9600 baud rate for UART communication. ADC supports up to 8 channels of 12-bit ADC, analog comparator and five levels of the internal reference voltage, ML51 provide two channels of PDMA, strong immunity like 8 kV ESD and 4.4 kV EFT. - For more information, please visit: http://www.nuvoton.com buy now: NuMaker-ML51PC/ http://direct.nuvoton.com/numaker-ml51pc NuTiny-ML51EB9AE/ http://direct.nuvoton.com/nutiny-ml51eb9ae contact us: SalesSupport@nuvoton.com #Product #Learning #Basic #en

NUC980 Series Microprocessor is a solution designed for industrial control and industrial IoT applications, such as gateway, serial server, remote control unit, plug and play data collector and IoT development platforms. NUC980 series embedded with an ARM9 core supports Linux, FreeRTOS and Non-OS Board Supporting Package. By using MCP technology, NUC980 series supports up to 128 MB DRAM. Not only can NUC980 simplify your hardware design, but help your product time to market. A less-layered PCB and a reduced PCB size can lower the BOM cost. NUC980 supports 2 High Speed and 6 Full Speed USB Host controllers that can be used for a replaceable module due to the plug and play feature of USB interface. Other interfaces include 10 UART, 4 I2C, 3 SPI, 4 CAN BUS, and 2 Camera sensor interface. Designers can use these interfaces to collect or convert the data needed. NUC980 features AES, RSA, SHA and ECC hardware crypto accelerator for CPU offloading. This crypto engine can be applied at data transfer, identification, and key exchange.Nuvoton also provides IoT protocols like HTTP, HTTPS, MQTT, CoAP, openSSL to help customers accomplish a security IoT platform easily. Nuvoton NUC980 adopts MCP technology supporting up to 128 MB DRAM. Developers can design a secure IoT product fast and convenient with the help of the hardware crypto engine. Next, I will introduce related development platforms. NuMaker NUC980 Serial Server Board is suitable for applications like serial server or serial to Ethernet gateways. This develop board includes 2 10/100 Ethernet ports, 8 UART ports, 1 MicroSD Slot, 2 USB ports and 16MB SPI NOR Flash. NuMaker NUC980 USB developer board is suitable for data collection applications. This board includes 1 10/100 Ethernet port, 8 USB ports, 5 UART ports, and 128 MB NAND Flash. NuMaker NUC980 Industrial IOT developer board is suitable for IOT applications. This board includes 1 10/100 Ethernet Port, 2 USB ports, microphone input, earphone output, 128 MB SPI NAND Flash and an Arduino Compatible interface. - For more information, please visit Nuvoton Technology Website: https://bit.ly/3hVdcmC buy now: http://direct.nuvoton.com/arm9-mpus/ contact us: SalesSupport@nuvoton.com #Product #Learning #Basic #en

NUC980為新唐提供的工業物聯網開發平台，適合應用於閘道器、串列伺服器、遠端控制裝置、隨插即用資料採集裝置及物聯網開發平台 NUC980 使用ARM9 內核，支援 Linux/FreeRTOS及Non-OS 的開發套件，採用MCP (Multi-Chip Package)封裝技術，內建最高達128 MB DRAM，讓硬體設計更容易，縮短產品上市時間。因為PCB層數減少、尺寸縮小，成本自然可以降低. 利用 USB具有即插即用的特性，NUC980擁有2組高速及6組全速USB主機控制器，實現可隨時更換模組的需求。其餘周邊介面如: 10組UART、4組I2C、3組SPI、4組CAN BUS及2組CMOS Sensor介面等，透過不同的介面達成資料轉換及資料採集的目的 NUC980內建AES、RSA、SHA及ECC的加解密引擎，可用於資料傳輸、身分認證及公私鑰交換，除了提升運算速度，並可有效降低CPU負載。另外，新唐也提供豐富的物聯網通訊協議，包含HTTP、HTTPS、MQTT、CoAP、openSSL等，幫助客戶加速完成高安全性的物聯網解決方案。 新唐NUC980採用MCP (Multi-Chip Package)技術，內建最高達128 MB DRAM，並提供硬體加解密引擎，協助客戶方便且快速設計安全的連網產品。接下來將為您介紹相關開發平台： -NuMaker NUC980 Serial Server開發板，適合應用於串列伺服器類型的產品開發，此開發板具備2組10/100 網路口、8組UART、1組MicroSD 卡槽、2組USB 接口以及 16 MB SPI NOR FLASH。 -NuMaker NUC980 USB開發板，適合應用於多組USB介面需求的資料採集裝置，此開發板具備1組 10/100 網路口、8組USB、5組UART及128 MB NAND FLASH。NuMaker NUC980 IIOT 開發板適合物聯網應用產品的開發，此開發板具備 1組 10/100 網路口、2 組USB 、麥克風輸入、耳機輸出、128 MB SPI NAND Flash以及 Arduino相容的介面 NUC980 Series Microprocessor is a solution designed for industrial control and industrial IoT applications, such as gateway, serial server, remote control unit, plug and play data collector and IoT development platforms. NUC980 series embedded with an ARM9 core supports Linux, FreeRTOS and Non-OS Board Supporting Package. By using MCP technology, NUC980 series supports up to 128 MB DRAM. Not only can NUC980 simplify your hardware design, but help your product time to market. A less-layered PCB and a reduced PCB size can lower the BOM cost. NUC980 supports 2 High Speed and 6 Full Speed USB Host controllers that can be used for a replaceable module due to the plug and play feature of USB interface. Other interfaces include 10 UART, 4 I2C, 3 SPI, 4 CAN BUS, and 2 Camera sensor interface. Designers can use these interfaces to collect or convert the data needed. NUC980 features AES, RSA, SHA and ECC hardware crypto accelerator for CPU offloading. This crypto engine can be applied at data transfer, identification, and key exchange.Nuvoton also provides IoT protocols like HTTP, HTTPS, MQTT, CoAP, openSSL to help customers accomplish a security IoT platform easily. Nuvoton NUC980 adopts MCP technology supporting up to 128 MB DRAM. Developers can design a secure IoT product fast and convenient with the help of the hardware crypto engine. Next, I will introduce related development platforms. NuMaker NUC980 Serial Server Board is suitable for applications like serial server or serial to Ethernet gateways. This develop board includes 2 10/100 Ethernet ports, 8 UART ports, 1 MicroSD Slot, 2 USB ports and 16MB SPI NOR Flash. NuMaker NUC980 USB developer board is suitable for data collection applications. This board includes 1 10/100 Ethernet port, 8 USB ports, 5 UART ports, and 128 MB NAND Flash. NuMaker NUC980 Industrial IOT developer board is suitable for IOT applications. This board includes 1 10/100 Ethernet Port, 2 USB ports, microphone input, earphone output, 128 MB SPI NAND Flash and an Arduino Compatible interface. - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買網址：http://direct.nuvoton.com/arm9-mpus/ 聯絡我們：SalesSupport@nuvoton.com

新唐低功耗8051微控制器 - ML51 系列 產品、應用及開發環境介紹。 ML51 平台的速度高達 24 MHz。並具有 1.8 ~ 5.5V 的寬工作電壓，同時功耗也提供非常低，在正常運行模式下功耗僅需 80 μA / MHz，在休眠模式下功耗更可以低至 0.8 μA；類比部分我們提供 8 組 12 位 ADC、2 組比較器以及 5 階內置參考電壓。另外我們也內建 2 組 PDMA，ESD 部分可以高達 8 kV 以及 EFT 可以高達 4.4 kV，我們還提供許多豐富週邊、像是三路串口以及 2 路 I2C 還有 2 路 SPI。 ML51 系列適合於在各種需要電池的裝置，舉例來說，我們可以讓一個225mAh 的鈕扣電池持續工作 3 年而不需要更換電池。另外我們提供的寬工作電壓可以供電低至 1.8V 也不需要外加 LDO 在 PCB 板、舉例像是 TWS 的無線藍芽耳機或者是獨立式的煙霧感測器都是非常適合 ML51 的產品。 ML51 提供的開發板可以直接與電腦相連，不需要額外的燒錄器。ML51 提供的開發板以及相關的 sample code 都能讓各位快速上手、另外我們新的開發板上面，背面都印有一個短網址、輸入短網址進入網頁後可以在上面找到相關的開發資訊。 - 更多產品資訊，請至新唐科技網站 https://bit.ly/3hVdcmC 購買網址： NuMaker-ML51PC/ http://direct.nuvoton.com/numaker-ml51pc NuTiny-ML51EB9AE/ http://direct.nuvoton.com/nutiny-ml51eb9ae 聯絡我們：SalesSupport@nuvoton.com This video is going to show you our latest Low power ML51 series microcontroller. The ML51 platform features high performance and pin-to-pin compatibility with our 32-bit microcontrollers, such as M480, M031, and M261 series . ML51 series supports up to 24MHz operation frequency, and 1.8V to 5.5V operating voltage, it provides four power modes: normal run mode, low power run mode, low power idle mode, and power down mode. In power down mode with multiple wake-up sources. The power consumption in low power idle mode is down to 13 μA and in power down mode it is less than 0.8 μA. When the clock runs at internal RC oscillator can also allow 9600 baud rate for UART communication. ADC supports up to 8 channels of 12-bit ADC, analog comparator and five levels of the internal reference voltage, ML51 provide two channels of PDMA, strong immunity like 8 kV ESD and 4.4 kV EFT.

As a leading supplier of 8051 microcontrollers (MCUs) , Nuvoton offers a variety of products with the best performance critical to the success of consumers and industrial products. NuMicro® 8051 industrial series microcontrollers is based on 1T 8051 core, running up to 24 MHz, with up to 32 Kbyte of Flash memory and up to 2 Kbyte of SRAM. It supports one high precision 24 MHz allowing ± 1 % deviation and one 10 kHz internal RC Oscillators, operating at 2.4 V ~ 5.5 V voltage and - 40 ℃ ~ 105 ℃. NuMicro® 8051 industrial series is equipped with special features such as up to 15 channels of 500k SPS 12-bit ADC, up to 12 channels of PWM with independent counters and GPIO supports 20 mA driving capability, also with ESD resistivity 8 kV and EFT resistivity 4.4 kV. Combined all these above high performance features, and provides 10-33 pin packages for a broad range of applications.