FAQ
- M051 Base Series(95)
- M0518 Series(97)
- M0519 Series(43)
- M0564 Series(1)
- Mini51 Base Series(90)
- Nano100/102 Base Series(101)
- Nano103 Base Series(10)
- Nano110/112 LCD Series(100)
- Nano120 USB Series(111)
- Nano130 Advanced Series(110)
- NUC029 Series(94)
- NUC100/200 Advanced Series(102)
- NUC120/122/123/220 USB Series(116)
- NUC121/125 Series(1)
- NUC126 USB Series(2)
- NUC130/230 CAN Series(103)
- NUC131/NUC1311 CAN Series(98)
- NUC140/240 Connectivity Series(114)
- M451 Base Series(118)
- M451M Series(117)
- M452 USB Series(130)
- M4521 USB Series(1)
- M453 CAN Series(128)
- M463 CAN FD/USB HS Series(1)
- M467 Ethernet/Crypto Series(1)
- M471 Series(1)
- M479 Motor Control Series(1)
- M481 Base Series(4)
- M482 USB FS OTG Series(4)
- M483 CAN Series(4)
- M484 USB HS OTG Series(4)
- M485 Crypto Series(4)
- M487 Ethernet Series(4)
- M4TK Touch Key Series(25)
- NUC442/472 Series(130)
- NUC472 Series(1)
- NUC505 Series(138)
Products
Applications
Function
+
FAQ
What needs to be aware of when the Watchdog Timer of the N76E003 is woken up in Power-down mode? Issue Date：2018-11-26
The Watchdog Timer (WDT) of the N76E003 has a hardware limitation. As long as the pre-scale of system frequency is enabled, the WDT cannot wake up the chip.
Since the N76E003 supports the Wakeup Timer (WKT) function, it is recommended to use the WKT to wake up in Power-down mode and use the WDT to prevent the program from entering un-expectable status.
| Products: | Microcontrollers ,8bit 8051 MCUs ,Low Pin Count 8051 Series |
|---|---|
| Applications: | Consumer |
| Function: | Peripherals,Clock Control,LIRC,Memory,Config,System Operation,Wake-up,Timer and PWM,Watchdog Timer (WDT) |