常见问答
- M051 系列(95)
- M0518 系列(97)
- M0519 系列(43)
- M0564 系列(1)
- Mini51 系列(90)
- Nano100 / 102 系列(101)
- Nano103 Base 系列(10)
- Nano110 / 112 LCD 系列(100)
- Nano120 USB 系列(111)
- Nano130 USB+LCD 系列(110)
- NUC029 系列(94)
- NUC100 / 200 系列(102)
- NUC120 / 122 / 123 / 220 USB 系列(116)
- NUC121/125 系列(1)
- NUC126 USB 系列(2)
- NUC130 / 230 CAN 系列(103)
- NUC131/NUC1311 CAN 系列(98)
- NUC140 / 240 USB+CAN 系列(114)
- M451 Base 系列(118)
- M451M 系列(117)
- M452 USB 系列(130)
- M4521 USB 系列(1)
- M453 CAN 系列(128)
- M463 CAN FD/USB HS 系列(1)
- M467 Ethernet/Crypto 系列(1)
- M471 系列(1)
- M479 Motor Control Series(1)
- M481 Base 系列(4)
- M482 USB FS OTG 系列(4)
- M483 CAN 系列(4)
- M484 USB HS OTG 系列(4)
- M485 Crypto 系列(4)
- M487 Ethernet 系列(4)
- M4TK 触摸 IC 系列(25)
- NUC442 / 472 系列(130)
- NUC472 Series(1)
- NUC505 系列(138)
FAQ
Why Keil cannot be used to program APROM? Issue Date:2018-01-16
To program code into APROM, please follow steps below to do preliminary troubleshooting first:
- Check code size
- Code size (Code + RO data)
Displayed on Build Output after compilation
Check if the APROM in the chip is sufficient. In the Keil main window, click Project→Options for Target→Device→App Flash
2. Check if the memory block to be programmed is valid.
In the Linker page, make sure that R/O and R/W Base settings are valid for the microcontroller, as shown below.
In the Flash Select section, if LDROM is selected, the file larger than LDROM size cannot be programmed. In the Keil main window, click Project→Options for Target→Utilities→Settings to open the following form.
3. For Nu-Link-Me V3.1 or later, please switch the Mass Storage function off. When switched on, the Mass Storage functions as USB and can directly program code by pulling in the .bin file. However, in Mass Storage mode, Keil cannot be used to do programming.
4. If the NUC505 is used, set Boot Select (SW1) to ICE-SPI Mode.
Boot Select (SW1)
S4 |
S3 |
S2 |
S1 |
Boot From |
Descriptions |
0 |
1 |
1 |
0 |
ICE SPI EXT |
ICE Mode with External SPI Flash |
0 |
1 |
1 |
1 |
ICE-SPI |
ICE Mode with Internal SPI Flash |
1 |
0 |
1 |
1 |
ICP |
Boot from ICP Mode |
1 |
1 |
0 |
1 |
SPI EXT |
Boot from External SPI Flash |
1 |
1 |
1 |
0 |
USB |
Boot from USB |
1 |
1 |
1 |
1 |
SPI |
Boot from Internal SPI Flash |
Products: | Microcontrollers ,Arm Cortex-M0 MCUs ,Arm Cortex-M4 MCUs |
---|---|
Applications: | |
Function: | Software and Tools,Development-Environment,Keil,ICE & Downloader,Nu-Link-Me (ICE) |