Before entering Power-down mode, the user needs to configure I/O pins based on the setting of peripheral applications. If the I/O pin function is set as PWM output, the output is high or low level depending on the state of the peripheral Power-down mode (at this time, it cannot be configured by GPIO output; to use the GPIO output again, it needs to be re-configured as GPIO output). If the I/O pin is not used, it can be set as Quasi-bidirectional mode to avoid pin floating.

Products:	Microcontrollers ,Arm Cortex-M0 MCUs ,M051 Base Series ,M0518 Series ,M0519 Series ,Mini51 Base Series ,Nano100/102 Base Series ,Nano110/112 LCD Series ,Nano120 USB Series ,Nano130 Advanced Series ,NUC029 Series ,NUC100/200 Advanced Series ,NUC120/122/123/220 USB Series ,NUC130/230 CAN Series ,NUC131/NUC1311 CAN Series ,NUC140/240 Connectivity Series ,Arm Cortex-M4 MCUs ,M451 Base Series ,M451M Series ,M452 USB Series ,M453 CAN Series ,NUC442/472 Series ,NUC505 Series
Applications:
Function:	Peripherals,System Operation,Power-down

以綠色半導體技術豐富人類生活的隱形冠軍

Be a hidden champion in providing sustainable semiconductors to enrich human life.

Video Center

Technical Support

Technical Community

Learning Center

Security

Partnership Innovation Center

FAQ

FAQ

Before entering Power-down mode, how does a user configure I/O pins to avoid the leakage problem? Issue Date：2015-09-25

以綠色半導體技術豐富人類生活的隱形冠軍

Content

Did you find the information you need ?

Layouts

Do you think it is easy to find the information you need ?

Layout style

Do you like the website color or picture configuration ?